RadioLabs - The Radio People - Home Technology Contact Us Visit our Forum! Broadband Wireless
Radio Products
Wireless Products Electronics Support
Wireless Cards Wireless Networking Wireless Antennas Wireless Cables Wireless Amplifiers
Indoor WiFi Amplifier

2 Watt Indoor Wifi Booster Amplifier
Extend the range of your wireless network with the Indoor Wifi Booster Amplifier. This is one of the easiest amplifiers to install and use, with literal plug and play connections, this amplifier will increase your wireless network's range substantially with no software, no configuration and virtually no setup.

Antenna Details

RadioLabs 2-Watt Indoor Amplifier

Indoor Wifi Amplifier
Click Here to view larger image
This item is not currently available.
Please select the appropriate connector for your wireless device. If you need additional cabling, please refer to our cabling page
View Your Shopping Cart


  • IEEE 802.11B/G compatible bi-directional booster amplifier
  • 2000mw (+33dBm) total output power
  • Heavy Duty One-Piece Aluminum Construction
  • Automatic gain control to minimize the signal distortion
  • Plug and Play installation with included coaxial jumper cable, power adapter and adjustable antenna
  • Universal 110/220 AC auto switching AC
  • Easy to install
  • Industrial standard SMA type connectors

High Power Indoor Wifi Booster Amplifier

This Two-Watt (2000mw) Wireless Indoor Amplfier delivers high power output in a small easy-to-use package. This amplfier will boost the receive and transmit (RX and TX) power of your wireless device a whopping 33 dBm. In English, this means connected to a wireless router, the range of your wireless broadcast will increase exponentially, allowing more stable connections, better wireless speeds and fewer dead spots. Connected to a USB or PCI Wifi adapter, the amplifier will allow greater reception range, faster throughput and better hotspot visibility.

The RAD24IND is designed with the power injector and the amplifier unit built into a single housing, so there is no need for the extra cabling required with most other 2-watt amplifiers. The only cable required the utilize this amplifier is included with the unit. Simply connect the amplifier to your wireless 802.11B/G compatible device and screw on the antenna, connected the AC adapter and you're done.

The RAD24IND is compatible with any wireless device that produces 100 milliwatts (+20dBm) or less of RF power and has an external antenna jack. This applies to most consumer-grade wireless routers and wireless NICs (Network Interface Cards

Also, because the RAD24IND Wireless Indoor Amplifier combines a power injector and an amplifier, it is not rated for outdoor use, please take this into consideration when ordering, if you need an outdoor-rated amplifier, please refer to our amplifier page here

        Indoor 2 Watt Wifi Amplifier Wiring Diagram

Indoor Wifi Amplifier Diagram

Back to WiFi Home

View all the WiFi Amplifiers

20 ft WiFi Antenna Cable

RadioLabs offers a full line of pre-made cables for your 802.11 installation. We have pre-made cables or you can have us custom make a cable for your specific application.   More...

SuperSeed - USB WiFi Adapter || High Power

New Product The Super Seed! -1 Watt - The easiest and most economical way to make any PC with a USB port wireless. Powered completely by your computer, the Seed is a completely self-sufficient Wi-Fi adapter, which, by itself, will pull in more signals than most other USB Wifi devices in it's price range. Use the Seed by itself, or connect our high gain antennas or amplifiers to pull in signals from farther away then you ever thought possible!   More...

High Gain Backfire Wireless Antenna

The Backfire WiFi Antenna has very good gain for such a small antenna. Performance on 2.4 GHz is excellent!! The 15 dB Backfire is the antenna we recommend for extended wireless coverage or building to building links.   More...

Wave Magnum - 1 Watt High Power USB WiFi

With a whopping 1,000mw output power!! RadioLabs rock-solid performer, the Wave Magnum is the highest power output USB adapter ever released. The Wave Magnum is capable of 802.11B, G and Super G speed allowing up to 108mBps throughput and up to 1 Mile range.   More...

Model #RAD24IND
2-Watt Indoor Wireless Amplifier
Operating Conditions
Temperature Range
Normal: -10°C ~ +50°C
Extreme: -30°C ~ +70°C
5% to 100% RH
Storage Temperature -40°C ~ +90°C
Supply Voltage AC 100V~240V
50/60Hz DC 12V/1A
Electrical Conditions
Modulation Schemes CPSK/OFDM
Operating Frequency 2.4GHz ~ 2.5GHz
Communication Protocols IEEE 802.11B & 802.11G
Spurious Emission 30MHz ~ 1 GHz : -36dBm(max.)
1GHz ~ 12.75 GHz : - 30dBm(max.)
Transmitter Specifications
Tx output power variation 25°C: 33dBm ±1dB(Pin=13dBm)
-30°C: 33dBm ±2dB(Pin=13dBm)
70°C: 33dBm ±2dB(Pin=13dBm)
Tx output power vs. Input
33dBm ±1dB(Pin=7~20dBm)
33dBm ±2dB(Pin=7~20dBm)
33dBm ±2dB(Pin=7~20dBm)
Tx ACPR ±11MHz -30°C ~ +70°C: 30dBc (max.)
TX on/off control time 30°C ~ +70°C: 5us (max.)
Receiver Specifications
Rx Gain -30°C ~ +70°C: 10dB(min.)
Rx Gain Flatness 25°C: ±1dB
-30°C: ±2dB
70°C: ±2dB
Rx Noise Figure -30°C ~ +70°C: 3.5dBm (max.)
Rx Third Intercept Point -30°C ~ +70°C: 33dBm (max.)
Rx Return Loss -30°C ~ +70°C: 14dB(min.)
Rx on/off control timing -30°C ~ +70°C: 2us (max.)
Current Consumption
Tx Current 1000mA (max.): -30°C ~ +70°C
Rx Current 130mA (max.): -30°C ~ +70°C
Package Contents

1. 2 Watt Booster Amplifier
2. Coaxial Adapter cable
3.. AC Power Adapter
4. Omni-Directional rubberduck antenna

Share |

Join the RadioLabs mailing list :
Your information is kept private and only used for our newsletter.

subscribe unsubscribe

Product Spotlight
RadioLabs Product Spotlight
More Information
RadioLabs Specials
Great Deals at RadioLabs
Terms of Use     Privacy Policy     Site Map     Help     Contact     About
RadioLabs and are copyright. The contents of these webpages are RadioLabs International Inc., 2003-2010. All rights reserved. If you experience any problems with our site, please contact our webmaster
RadioLabs - The Radio People -